98/2 FPSO

98/2 FPSO Project Summary: Bumi Armada/SPOG is providing an FPSO to ONGC, which is developing the New Exploration Licensing Policy (NELP) for Block KG-DWN-98/2 in deep waters off the East Coast of India. The KG-DWN-98/2 block is located within 25-40 km of the nearest landfall and is adjacent to RIL’s KG-D6 field and GSPC’s Deendayal […]

Flare Gas Recovery

Flare Gas Recovery Project Summary: 2*100% trains of flare gas recovery unit (FGRU) consists of gas sweetening and amine regeneration unit for the Wasit gas plant, Saudi Arabia Key Facts: Amine gas sweetening using generic MDEA for gas flow rate of 10,240,000 SCFD at 260 PSIG and 140 degF. Inlet: H2S: 33mole% and Carbon Dioxide: […]

Generic Gas FPSO 1, Cidade De Sao Mateus, Brazil

Generic Gas FPSO 1, Cidade De Sao Mateus, Brazil Project Summary: 3 Topsides Modules – Seawater Treatment (SRU) & Water Injection, TEG Dehydration Module with HP/LP Fuel Gas conditioning, plus Flare Processing Module Key Facts: First ever Gas FPSO for Petrobras in Brazil and was the largest sized FPSO at that time 3 modules, weighing […]

Cachalote Relocation of FPSO Capixaba

Cachalote Relocation of FPSO Capixaba Project Summary: Amine Sweetening Module, 750 Metric Tons Key Facts: This was the first FPSO which was relocated and re-purposed for a new field location, highlighting one of the primary advantages of FPSO’s compared to fixed platform facilities. 1 module, 750 metric tons. Due to the existing space constraint on […]

ONGC KG DWN 98/2

ONGC KG DWN 98/2 FPSO Project Summary: Five topsides modules including Seawater Treatment Module, Produced Water and Utility Module, Gas Dehydration & Hydrocarbon Dewpoint Module, Chemical Injection Module and Metering Laydown Module. (Total weight approximately 5,500 Tonnes). Key Facts: Achieved 2,000,000 manhours without an LTI. Client: SPBAG Armada 98/2 Pte Ltd – Joint Venture between […]

ENI Mexico Area 1 FPSO Project

ENI Mexico Area 1 FPSO Project Project Summary: EPC of the pressure vessels and process internals. Key Facts: Required the use of 4 Production Vessels and 2 Electrostatic Dehydrator/Desalters Client: International FPSO Provider Challenge: Project required 825 cladded vessels and local content for pressure vessel fabrication. VME Solution: Pressure vessel fabrication and internal installation was […]

Standard O2 Recovery Units

Standard O2 Recovery Units Project Summary: Manufacture and package O2 recovery units with multiple standard capacity sizes for a high volume production client’s sale and leasing fleet. Key Facts: Leveraged lean manufacturing process on multi-unit orders for lowest cost supply Collaborative partnership to deliver best-in-class commercial product Client: Environmental Technology Company Challenge: The client needed […]

ENI – OCTP – GHANA

ENI – OCTP- GHANA Project Summary: Supply TCN-1 Topside Process Packages (6 modules, 2 skids) – including gas compression, gas dehydration and hydrocarbon dewpoint control, gas injection, oil treatment, crude stabilization, flare knockout and a Flare Gas Recovery Module. Key Facts: Associated Gas Flow 190 MMSCFD to 430 bara Non-Associated Gas (NAG) Flow 190 MMSCFD […]

Husky Madura FPSO

Husky Madura FPSO Project Summary: Amine gas sweetening for H2S removal, Gas Dehydration Module and Sulfur Recovery Module. Key Facts: Sulfur recovery unit was successfully tested and commissioned and is the first technology of this kind to be operated on an FPSO Total Module weight of the project – 3000 Tons. The SRU module was […]

Baobab FPSO, Cote d’Ivoire, West Africa

Baobab FPSO, Cote d’Ivoire, West Africa Project Summary: HP, IP, LP Separators, Electrostatic Coalescer, Gas Processing Module Key Facts: Processing capacity of the Module – 75 MMSCFD Gas flow rate This project became the springboard for expansion of VME into Asia – particularly on the fabrication of Topsides Modules. VME First: EPC Scope for Offshore […]